Motorcycle Has No Spark. Make sure your motorcyle keeps its spark with e3 motorcycle spark plugs. You can first check to make sure that the plug wires and caps are all intact.
1982 Dt100 No Spark Vintage Dirt Bikes Thumpertalk from cdn.thumpertalk.com Pulled the plug wires, put another plug in wire and no spark. I have replaced the coil, and have the correct volts going into it. Took tank back off, no pinched wires. If only one spark plug is dead, the problem has to be closer to the plug. Holding the loose plug by its ceramic insulator, make certain the plug's metal base is well grounded.
If there still is no spark, you will need to determine if the engine has points or electronic ignition.
Users get fixated on these items and jump to the conclusion they must be responsible for their problem because these items are easy to see and replace. If none has spark, the whole ignition system is not getting power. If one is out of spec, replace it, but first check all the plug in connectors. Besides, if your harley has a security system installed, it might not be getting the juice properly. If you have time, allow the motorcycle to sit until everything evaporates. If only one spark plug is dead, the problem has to be closer to the plug.
Post a Comment for "Motorcycle Has No Spark"